IE 100 PRO Wireless In-Ear Headphones (Clear)
Product Description
The IE PRO BT Bluetooth Connector features an in-line remote to control calls and music playback and a built-in microphone for calls and streaming. An internal lithium-polymer battery provides up to ten hours of continuous playtime for enjoyable, all-day listening. Use the included USB Type-C to Type-A cable to recharge the battery in up to 2.5 hours.
The IE 100 PRO's 10mm single dynamic drivers deliver a wide 20 Hz to 18 kHz frequency response and a well-rounded, warm sound that's powerful and nuanced, even on loud stages. Whether used at low or high sound-pressure levels (up to 115 dB SPL), your audio remains distortion-free and clearly defined—reducing ear fatigue during extended listening sessions.
Suitable for the rigors of stage use, the rugged IE 100 PRO Wireless also come with a 4.3' detachable cable for wired operation. Equipped with a 3.5mm jack, the cable enables you to use your earphones with wireless IEM bodypack receivers, mixers, and headphone amplifiers.
The compact housings are light (at 5.6 oz) and feature an ergonomic earmold design with a flat profile that provides a secure fit and comfort during prolonged use. The included pair of medium-size foam ear adapters adds up to 26 dB of passive noise attenuation, keeping extraneous sounds out and allowing you to focus on your music.
The IE 100 PRO Wireless is also supplied with three pairs of silicone ear adapters, a cleaning tool, and a soft protective pouch.
Item Type | |
Number of Included Headphones/Receivers | |
Number of Included Transmitters | |
Number of Included Headsets | |
Number of Included Transceivers | |
Headphone | |
Earpiece Design | In-Ear (Intra-Aural) |
Earpiece Swivel | Not Specified by Manufacturer |
Earpiece Connection / Wearing Style | Ear Clip |
Foldable | Not Specified by Manufacturer |
Number of Earpieces | |
Sound Field | |
Earpad Size | |
Driver Type | Dynamic |
Number of Drivers | 1, per Earpiece |
Driver Size | 0.4" / 10 mm |
Diaphragm | |
Magnet Type | |
Voice Coil | |
Impedance | 20 Ohms |
Active Noise Cancellation | No |
Controls/Microphone Location | Neckband |
Full Remote OS Support | Android, iOS |
Sensors | None |
Contact Pressure | |
Performance | |
Frequency Response | 20 Hz to 18 kHz |
Resonant Frequency | |
Sensitivity | |
Matching Tolerance | |
Maximum Sound Pressure Level (SPL) | 115 dB |
Maximum Power Handling | |
Functional Bias Voltage | |
Electrostatic Capacitance | |
Output Power | |
Volume Limiting | |
Noise Attenuation | Up to 26 dB (Passive) |
Total Harmonic Distortion (THD) | 0.1% |
SNR | |
CMRR | |
Channel Separation | |
Storage Capacity | |
Microphone | |
Number of Mics | 1 |
Beamforming Support | |
Type | MEMS |
Diaphragm Size | |
Mic Boom Location | |
Pickup Pattern | Omnidirectional |
Noise Canceling | Not Specified by Manufacturer |
Frequency Response | 100 Hz to 8 kHz |
Operating Voltage | |
Sensitivity | -42 dBV/Pa |
Maximum SPL | |
Impedance | |
SNR | |
Distortion | |
Equivalent Noise Level | |
Wireless Connectivity | |
Wireless Transmission | |
Number of RF Channels | |
RF Bandwidth | |
Max Systems per Setup | |
Wireless Modulation | Bluetooth: π/4 DQPSK, 8DPSK, GFSK |
DECT Standard | |
Duplex Mode | |
RF Channel Access Method | |
Latency | |
Speech Encoding | |
Transmission Speed | |
Approximate RF Sensitivity | |
Supported Audio Codecs | AAC, SBC, aptX, aptX LL |
Bluetooth Profiles | A2DP, AVRCP, HFP, HSP |
Bluetooth | 5.0 |
Bluetooth Power Class | |
Wireless Range | |
Frequency | Bluetooth: 2.4 GHz (2402 to 2480 MHz) |
Transmitter Power | 10 mW |
Multipoint Support | |
Maximum Paired Devices | |
NFC | None |
Wireless Chipset | |
True Wireless Pairing Method | |
Transmitter Host Connection | |
Encryption | |
Wired Connectivity | |
Audio Connector to Source | 1 x 1/8" / 3.5 mm TRS Male Right-Angled |
Connector Plating | |
Adapter (Included) | |
Cable Design | |
Audio Connector to Earpiece | 2 x Proprietary Male |
Cable Length | |
Cable Length | 4.3' / 1.3 m (1/8" / 3.5 mm) |
Cable Color | |
Cable Conductor Material | |
Battery | |
Battery Type | |
Battery Type | |
Battery Chemistry | Lithium-Ion Polymer (LiPo) |
Battery Chemistry | |
Capacity (mAh) | |
Runtime | 10 Hours (Music) 240 Hours (Standby) |
Runtime | |
Quick Charging Times | |
Recharge Time | 2.5 Hours |
DC Input Power | |
Wireless Charging | None |
Charging Port | USB Type-C |
Charging Cable Length | |
Number of Channels | |
Users per System | |
I/O Connectors | |
Antenna | |
Audio Decoding | |
Number of Charging Ports | |
AC/DC Power Adapter | |
AC Input Power | |
Power Consumption | |
Additional Runtime | |
Battery Chemistry | |
Capacity | |
Charging Time | |
Charging Interface | |
Platform Support | |
OS Compatibility | |
Required Hardware | |
Internet Connection | |
Charging Temperature | |
Operating Temperature | |
Storage Temperature | |
Operating Humidity | |
Storage Humidity | |
Certifications | |
Physical | |
Color | Clear |
Water Resistance | None |
IP Rating | |
LED Indicator | |
Material of Construction | |
Dimensions | |
Weight | |
Warranty Length | Limited 2-Year Warranty |