PulseAudio PA2X60 120W 2-Channel Amplifier
Product Description
Balancing compactness and quality, the Vanco PulseAudio PA2X60 offers two channels of clean Class-D digital amplification and thoroughly simple operation, making it well suited for an array of residential and commercial applications. It can deliver 60W RMS per channel at eight ohms, 90W RMS per channel at four ohms, or 180W in bridge mode.
Connect your audio source to the 3.5mm or RCA stereo input jacks, or connect two sources and let the amp automatically mix them together. Speaker outputs are available on a Euroblock 4-pole connector. Volume is adjustable via a convenient knob on the front panel. Thanks to the automatic-on and standby functions, there is no need to manually power the PA2X60 off or on.
Connect your audio source to the 3.5mm or RCA stereo input jacks, or connect two sources and let the amp automatically mix them together. Speaker outputs are available on a Euroblock 4-pole connector. Volume is adjustable via a convenient knob on the front panel. Thanks to the automatic-on and standby functions, there is no need to manually power the PA2X60 off or on.
Amplifier | |
Number of Channels | 2 |
Power Rating | 60 W RMS x 2 at 8 Ohms 90 W RMS x 2 at 4 Ohms 180 W RMS at 8 Ohms (Bridge Output) |
Frequency Response | 20 Hz to 20 kHz (+0/-2 dB at 8 Ohms) |
Input Sensitivity | 700 mV |
Signal to Noise Ratio | >90 dB (A-Weighted) |
Total Harmonic Distortion (THD) | <1% (Rated Power: 60W at 8 Ohms) |
Connectors | |
Input | 1 x 1/8" / 3.5 mm TRS Female Unbalanced Stereo Input 1 x 2RCA Female Unbalanced Stereo Input |
Output | 1 x Euroblock 4-Pole Speaker Output |
General | |
Protections | Thermal Protection Short Protection |
Power Requirements | 115/230 VAC, 50/60 Hz |
Dimensions (W x D x H) | 8.4 x 9.8 x 1.7" / 21.4 x 25.0 x 4.4 cm |
Weight | 2.9 lb / 1.3 kg |