USA 
ATH-ANC300TW QuietPoint Noise-Canceling True Wireless In-Ear Headphones
Product Description
Isolate yourself with high quality audio using the ATH-ANC300TW QuietPoint Noise-Canceling True Wireless In-Ear Headphones from Audio-Technica. Using wireless Bluetooth transmission, your music, podcasts, and more are delivered to you through 5.8mm drivers with DLC (diamond-like carbon) coated diaphragms. This hardware is joined by support for aptX and Qualcomm TrueWireless Stereo Plus low-latency support for stable connections.
Listen to this audio without distraction thanks to Audio-Technica's QuietPoint noise-canceling technology. Two microphones inside each earbud, one behind and one in front of the driver, work to receive ambient sounds. One mic is specifically oriented to optimize sound delivery. The built-in processor filters out the noise so you're only left with what you want to hear. Using the Audio-Technica Connect app, you can select between three different noise-canceling modes.
The ANC300TW headphones can operate for up to 4.5 hours per charge, and can receive an additional 13.5 hours of power via the included portable charging case. Recharging begins as soon as you place the earbuds back inside the case.
Listen to this audio without distraction thanks to Audio-Technica's QuietPoint noise-canceling technology. Two microphones inside each earbud, one behind and one in front of the driver, work to receive ambient sounds. One mic is specifically oriented to optimize sound delivery. The built-in processor filters out the noise so you're only left with what you want to hear. Using the Audio-Technica Connect app, you can select between three different noise-canceling modes.
The ANC300TW headphones can operate for up to 4.5 hours per charge, and can receive an additional 13.5 hours of power via the included portable charging case. Recharging begins as soon as you place the earbuds back inside the case.
| Item Type | |
| Number of Included Headphones/Receivers | |
| Number of Included Transmitters | |
| Number of Included Headsets | |
| Number of Included Transceivers | |
| Headphone | |
| Earpiece Design | In-Ear (Intra-Aural) |
| Earpiece Swivel | |
| Earpiece Connection / Wearing Style | |
| Foldable | |
| Number of Earpieces | |
| Sound Field | |
| Earpad Size | |
| Driver Type | Dynamic |
| Number of Drivers | 1, per Earpiece |
| Driver Size | 0.23" / 5.8 mm |
| Diaphragm | Carbon-Coated |
| Magnet Type | |
| Voice Coil | |
| Impedance | 14 Ohms |
| Active Noise Cancellation | Yes |
| Controls/Microphone Location | Controls: Left Earpiece, Right Earpiece Microphone: Left Earpiece, Right Earpiece |
| Full Remote OS Support | Not Specified by Manufacturer |
| Sensors | |
| Contact Pressure | |
| Performance | |
| Frequency Response | 20 Hz to 25 kHz (Wireless) |
| Resonant Frequency | |
| Sensitivity | 106 dB/mW |
| Matching Tolerance | |
| Maximum Sound Pressure Level (SPL) | |
| Maximum Power Handling | |
| Functional Bias Voltage | |
| Electrostatic Capacitance | |
| Output Power | 10 mW |
| Volume Limiting | |
| Noise Attenuation | |
| Total Harmonic Distortion (THD) | |
| SNR | |
| CMRR | |
| Channel Separation | |
| Storage Capacity | |
| Microphone | |
| Number of Mics | |
| Beamforming Support | |
| Type | MEMS |
| Diaphragm Size | |
| Mic Boom Location | |
| Pickup Pattern | Omnidirectional |
| Noise Canceling | |
| Frequency Response | 100 Hz to 10 kHz |
| Operating Voltage | |
| Sensitivity | -32 dB at 1 kHz / 1 mV/Pa |
| Maximum SPL | |
| Impedance | |
| SNR | |
| Distortion | |
| Equivalent Noise Level | |
| Wireless Connectivity | |
| Wireless Transmission | |
| Number of RF Channels | |
| RF Bandwidth | |
| Max Systems per Setup | |
| Wireless Modulation | Bluetooth: FHSS |
| DECT Standard | |
| Duplex Mode | |
| RF Channel Access Method | |
| Latency | |
| Speech Encoding | |
| Transmission Speed | |
| Approximate RF Sensitivity | |
| Supported Audio Codecs | AAC, SBC, aptX |
| Bluetooth Profiles | A2DP, AVRCP, HFP |
| Bluetooth | 5.0 |
| Bluetooth Power Class | |
| Wireless Range | 33' / 10.1 m |
| Frequency | Bluetooth: 2.4 GHz (2.402 to 2.48 GHz) |
| Transmitter Power | |
| Multipoint Support | |
| Maximum Paired Devices | |
| NFC | |
| Wireless Chipset | |
| True Wireless Pairing Method | Qualcomm TrueWireless Stereo Plus |
| Transmitter Host Connection | |
| Encryption | Proprietary |
| Audio Connector to Source | |
| Connector Plating | |
| Adapter (Included) | |
| Cable Design | |
| Audio Connector to Earpiece | |
| Cable Length | |
| Cable Length | |
| Cable Color | |
| Cable Conductor Material | |
| Battery | |
| Battery Type | |
| Battery Type | |
| Battery Chemistry | Lithium-Ion |
| Battery Chemistry | |
| Capacity (mAh) | |
| Runtime | 4.5 Hours (BT+ANC) |
| Runtime | |
| Quick Charging Times | |
| Recharge Time | 1 Hour |
| DC Input Power | 3.7 VDC |
| Wireless Charging | |
| Charging Port | Pins |
| Charging Cable Length | |
| Number of Channels | |
| Users per System | |
| I/O Connectors | |
| Antenna | |
| Audio Decoding | |
| Number of Charging Ports | |
| AC/DC Power Adapter | |
| AC Input Power | |
| Power Consumption | |
| Charging Case | |
| Additional Runtime | 13.5 Hours |
| Battery Chemistry | Lithium-Ion Polymer (LiPo) |
| Capacity | |
| Charging Time | 2.5 Hours |
| Charging Interface | USB Type-C |
| Platform Support | |
| OS Compatibility | |
| Required Hardware | |
| Internet Connection | |
| Environmental | |
| Charging Temperature | |
| Operating Temperature | 41 to 104°F / 5 to 40°C |
| Storage Temperature | |
| Operating Humidity | |
| Storage Humidity | |
| Certifications | |
| Physical | |
| Color | |
| Water Resistance | Resistant |
| IP Rating | IPX2 |
| LED Indicator | |
| Material of Construction | |
| Dimensions | |
| Weight | Headphones: 0.5 oz / 14 g Charging Case: 1.8 oz / 50 g |
| Warranty Length | Limited 1-Year Warranty |