United States
STAGEPAS 1K Portable All-in-One PA System with Bluetooth Product Image

STAGEPAS 1K Portable All-in-One PA System with Bluetooth


Product Description

The Yamaha STAGEPAS 1K is an all-in-one portable PA system with Bluetooth that is compact enough to carry by hand making it well suited for coffee shops, small bands, bars, mobile DJs, and corporate AV applications. The system features an 810W Class-D amplifier to power the 12" woofer, while 190W powers the array, which consists of 10 x 1.5" cone drivers in a J-curve array configuration. The system offers a frequency response of 37 Hz to 20 kHz (-10 dB) and a maximum SPL of 119 dB.

The on-board mixer supplies three mono XLR-1/4" combo connectors and a single stereo input with two 1/4" or a 3.5mm connector. Channels 2-3 feature Hi-Z inputs for connecting acoustic-electric guitars and other instruments, while the stereo channel offers a Bluetooth connection for streaming wireless audio from any compatible device. Each channel includes a single-knob EQ for quickly contouring your source for the best sound possible. Channels 1-3 offer a dedicated reverb send. The master section provides a mode selector allowing you to dial in a single-knob compressor for speech, music, or club applications, while the reverb dial offers hall, plate, room, and echo settings. There is also a built-in limiter to prevent any overvaluation of the signal, which may damage the drivers.

Two STAGEPAS 1K can be connected for stereo or mono operation, expanding the coverage, SPL, and mixer inputs. The STAGEPAS Editor control app allows you to remotely dial in volume and EQ settings from a distance and save settings for easy recall. The system includes two spacers, allowing for flexibility in height for deployment onstage or on the floor. A custom-fit cover is included and features compartments for the speaker array, the two spacers, and a variety of accessories, such as microphones, cables, and more.
Portable PA System
Speaker Configuration 1 x 2-Way Loudspeaker with Subwoofer
Number of Input Channels 5 (3 x Mono, 1 x Stereo)
Amplifier Power Rating LF:
810 W Program (at 4 Ohms)
HF:
190 W Program (at 4 Ohms)
Total:
1000 W Program
Amplifier Class Class-D
Impedance
Speakers
Enclosure Type Subwoofer:
Bass-Reflex
Full-Range Driver
Full-Range Driver (Oval)
HF Driver 10 x 1.5" / 38.1 mm
HF Voice Coil
MF Driver
MF Voice Coil
LF Driver 1 x 12" / 30.48 cm Woofer
LF Voice Coil
Subwoofer Driver
Subwoofer Voice Coil
Magnet
Speaker Sensitivity
Signal Processing
Crossover 240 Hz
Input Pad
EQ 1 x Contour
Semi-Parametric EQ
Effects 4 x Reverb
DSP
Filters
Dynamic Processing Compression, Peak Limiter
Form Factor
Capsule
Polar Pattern
Output Connector
Operating Voltage
Microphone Sensitivity
Muting
Performance
Frequency Response System:
37 Hz to 20 kHz -10 dB
Frequency Range
Maximum SPL 119 dB SPL (Peak)
Max Coverage Distance
Max Coverage Area
Coverage Angle 170° H x 30° V
Coverage Angle
Input Sensitivity XLR Mic Input:
-36 dBu to -50 dBu
XLR Line Input:
-10 dBu -24 dBu
1/4" Mic Input:
-30 dBu -44 dBu
1/4" / 1/8" / 3.5 mm Line Input:
-4 dBu -18 dBu
Gain Range
Max Input Level Mic Input:
-10 dBu (Balanced)
-4 dBu (Balanced)
Line Input:
+16 dBu (Balanced)
+22 dBu (Balanced)
I/O Impedance XLR Input:
3 Kilohms (Balanced)
1/4" Input:
10 Kilohms (Balanced)
SNR
THD
Dynamic Range
Protections
Connectivity
Audio I/O 3 x Combo XLR-1/4" TS Female Balanced/Unbalanced Mic/Line/Hi-Z Input
2 x 1/4" TRS Female Balanced/Unbalanced Line Input
1 x 1/8" / 3.5 mm TRS Female Balanced/Unbalanced Line Input
1 x XLR 3-Pin Male Balanced Line Input
1 x XLR 3-Pin Female Balanced Line/Link Output
Phantom Power
USB
Media Playback
Media & File Formats Supported
Network I/O
Wireless Connectivity
Wireless Transmission
Max Wireless Range
Number of RF Channels
RF Frequency Band
RF Bandwidth
Form Factor
RF Output Power
Transmitter I/O
Max Number of Simultaneous Transmitters
Diversity
Antenna
Squelch
Approximate RF Sensitivity
Deviation
Modulation
RF Channel Crosstalk
Spurious
Bluetooth
Bluetooth 5.0
Bluetooth Profiles A2DP 1.2
Pairing
Bluetooth Channel
Frequency 2.4 GHz (2402 to 2480 MHz)
Bluetooth Power Class 1
Bluetooth Input Gain
Transmitter Power 32 mW
Bluetooth Range
Power
Battery Type
Approximate Battery Life
Battery Charging Time
Internal Battery Capacity
Battery Cycle Count
AC Input Power 110 to 120 VAC, 60 Hz 
Power Supply Output
Current Consumption
Power Consumption 25 W (Idle)
85 W (1/8 Power)
DC Input Power
AC Power Connector 1 x IEC Input
Physical
Cable Length
Transport Options 1 x Handle (Top)
Mounting
Stand Height
Stand Load Capacity
Cooling
Construction Material
IP Rating
Operating Temperature
Storage Temperature
Operating Humidity
Certifications
Dimensions System:
78.74 x 16.46 x 13.15" / 2000 x 418 x 334 mm (Full Assembly)
Subwoofer:
21.65 x 16.46 x 13.15" / 550 x 418 x 334 mm
Speaker:
22.91 x 3.39 x 2.64" / 582 x 86 x 67 mm
Stand:
21.85 x 3.39 x 2.64" / 555 x 86 x 67 mm (Each)
Weight System:
50.71 lb / 23 kg (Full Assembly)
Subwoofer:
44.09 lb / 20 kg
Speaker:
3.97 lb / 1.8 kg
Stand:
1.32 lb / 0.6 kg (Each)
Warranty Length Limited 1-Year Warranty
Change Your Country