Roadbuddy 10 HS B5 Battery-Powered Bluetooth 10" Speaker with Bodypack and Headset Microphone
Product Description
The Roadbuddy 10 HS features a headset microphone, a wireless bodypack transmitter, and a built-in UHF receiver, forming a reliable wireless system that operates in the 584 to 607 MHz frequency band. The integrated media player incorporates a backlit multifunction display, mode and transport buttons, and support for an array of music sources such as 3.5mm or RCA inputs, wireless streaming via Bluetooth, an SD card, or a USB flash drive. The included IR remote control provides comprehensive access to volume, EQ, track selection, and more. The onboard mixer also offers two XLR-1/4" combo jacks that are switchable for mic or line level, per-channel volume controls, 2-band EQ, echo, and master volume. The Roadbuddy 10 HS is easily transportable, thanks to built-in caster wheels and a pull-out handle. On the top, there is a handy storage compartment for up to two handheld microphones. The Roadbuddy's polypropylene cabinet is durable, lightweight, and stand mountable.
Portable PA System | |
Speaker Configuration | 1 x 2-Way Loudspeaker |
Number of Input Channels | 3 (2 x Mono, 1 x Stereo) |
Amplifier Power Rating | 120 W RMS 480 W Peak |
Amplifier Class | Class-D |
Impedance | |
Speakers | |
Enclosure Type | Bass-Reflex |
Full-Range Driver | |
Full-Range Driver (Oval) | |
HF Driver | 1" / 2.5 cm Horn-Loaded Compression Driver |
HF Voice Coil | |
MF Driver | |
MF Voice Coil | |
LF Driver | 10" / 25.4 cm Woofer |
LF Voice Coil | |
Subwoofer Driver | |
Subwoofer Voice Coil | |
Magnet | Ferrite |
Speaker Sensitivity | 96 dB |
Signal Processing | |
Crossover | |
Input Pad | |
EQ | HF Shelf LF Shelf |
Semi-Parametric EQ | |
Effects | Echo (Type Unspecified) |
DSP | |
Filters | |
Dynamic Processing | |
Microphone | |
Form Factor | Headworn |
Capsule | |
Polar Pattern | |
Output Connector | TA3/Mini XLR Female |
Operating Voltage | |
Microphone Sensitivity | |
Muting | |
Performance | |
Frequency Response | Wireless: 50 Hz to 17 kHz Speaker: 55 Hz to 18 kHz |
Frequency Range | |
Maximum SPL | 115 dB |
Max Coverage Distance | |
Max Coverage Area | |
Coverage Angle | |
Coverage Angle | |
Input Sensitivity | |
Gain Range | |
Max Input Level | |
I/O Impedance | |
SNR | |
THD | 0.002% |
Dynamic Range | |
Protections | Overcurrent, Short Circuit |
Connectivity | |
Audio I/O | 1 x 1/4" TS Unbalanced Line Output 2 x Combo XLR-1/4" TRS Balanced/Unbalanced Mic/Line Input 1 x 1/8" / 3.5 mm TRS Unbalanced Line Input 1 x Stereo RCA Line Input |
Phantom Power | |
USB | USB Type-A (Media Playback) |
Media Playback | 1 x SD |
Media & File Formats Supported | MP3, WAV, WMA |
Network I/O | |
Wireless Connectivity | |
Wireless | |
Wireless Transmission | Bodypack Transmitter: Analog UHF |
Max Wireless Range | |
Number of RF Channels | 16 |
RF Frequency Band | 584 to 607 MHz |
RF Bandwidth | |
Form Factor | Transmitter: 1 x Bodypack |
RF Output Power | 10 mW |
Transmitter I/O | 1 x TA3/Mini XLR 3-Pin Male Input |
Max Number of Simultaneous Transmitters | |
Diversity | |
Antenna | Receiver: TNC (Rear-Mount) |
Squelch | |
Approximate RF Sensitivity | |
Deviation | |
Modulation | FM |
RF Channel Crosstalk | |
Spurious | |
Bluetooth | |
Bluetooth | |
Bluetooth Profiles | |
Pairing | Manual |
Bluetooth Channel | |
Frequency | |
Bluetooth Power Class | |
Bluetooth Input Gain | |
Transmitter Power | |
Bluetooth Range | 32.8' / 10 m |
Power | |
Battery Type | System: 2 x Rechargeable 12 V Lead-Acid Bodypack Transmitter: 2 x AA (Not Included) |
Approximate Battery Life | 8 Hours |
Battery Charging Time | 10 Hours |
Internal Battery Capacity | 5 Ah |
Battery Cycle Count | |
AC Input Power | 100 to 240 VAC, 50 / 60 Hz |
Power Adapter Output | |
Current Consumption | |
Power Consumption | |
DC Input Power | |
AC Power Connector | 1 x IEC Input |
Physical | |
Cable Length | |
Transport Options | 2 x Wheels (Bottom) 1 x Telescopic Handle (Top) 1 x Handle (Top) |
Mounting | 1.4" / 35.56 mm Pole Socket |
Stand Height | |
Stand Load Capacity | |
Cooling | |
Construction Material | ABS, Polypropylene |
IP Rating | |
Operating Temperature | 32 to 122°F / 0 to 50°C |
Storage Temperature | |
Operating Humidity | 10 to 70% (Recommended) |
Certifications | |
Dimensions | 20.67 x 16.34 x 12.91" / 525 x 415 x 328 mm |
Weight | Bodypack Transmitter: 2.82 oz / 0.08 kg (without Batteries) System: 36.4 lb / 16.5 kg |
Warranty Length | Limited 2-Year Warranty |