USA 
PDA7BU Stereo Receiver with Bluetooth
Product Description
Enjoy music from your wired and Bluetooth-capable devices with the Pyle Pro PDA7BU Stereo Receiver. This 2-channel receiver produces up to 100W of RMS power per channel at 8 Ohms and is equipped with center and surround speaker terminals powered by the main amplifiers to produce multichannel stereo audio. The RCA subwoofer output lets you connect your subwoofer for added bass response. Built-in Bluetooth connectivity allows you to wirelessly stream music from compatible audio sources such as computers, smartphones, and tablets.
In addition to Bluetooth, the PDA7BU has a USB reader and SD card slot that each support devices up to 32GB for playback of MP3 and WMA files. Three stereo RCA inputs let you connect your wired audio sources, and two 1/4" microphone inputs are also onboard. This receiver's integrated FM tuner allows you to enjoy free over-the-air content.
In addition to Bluetooth, the PDA7BU has a USB reader and SD card slot that each support devices up to 32GB for playback of MP3 and WMA files. Three stereo RCA inputs let you connect your wired audio sources, and two 1/4" microphone inputs are also onboard. This receiver's integrated FM tuner allows you to enjoy free over-the-air content.
| Amplifier | |
| Channels | 2.0 |
| Amplifier Class | |
| Power Output per Channel | 100 W at 8 Ohms 200 W at 4 Ohms |
| Dynamic Power per Channel | |
| Frequency Response | 20 Hz to 20 kHz �2 dB |
| THD+N | |
| Speaker Impedance | 4 to 16 Ohms |
| Tone Control | |
| Damping Factor | |
| Audio Processing | |
| DTS Compatibility | |
| Dolby Compatibility | |
| Auro 3D Support | No |
| Upmixing Technology | |
| Supported File Formats | MP3, WMA |
| DAC | |
| HDR Compatibility | |
| Pass-Through Support | |
| Upscaling | |
| GUI | |
| Connectivity | |
| Rear A/V Inputs | 3 x Stereo RCA |
| Rear A/V Outputs | 1 x RCA Subwoofer Pre-Out |
| Front I/O | 1 x 1/8" / 3.5 mm Aux Input 2 x 1/4" / 6.35 mm Microphone Input 1 x USB Type-A Input |
| Other Rear I/O | 1 x Bluetooth Antenna Terminal 1 x FM Antenna Terminal |
| Speaker Connectors | 2 x Binding Post Pairs (Front) 3 x Spring Clip Pairs (Center, Rear Surround) |
| HDCP Support | |
| HDMI Compression Modes | |
| Audio Return Channel (ARC) | |
| HDMI CEC | |
| Media Card Slot | SDHC (Up to 32 GB) |
| A/B Speaker Selection | |
| Bi-Amp Capability | |
| Input Impedance | |
| Input Sensitivity | 200 mV |
| Rated Output / Impedance | |
| Dynamic Range | |
| Signal to Noise Ratio | 85 dB |
| Total Harmonic Distortion (THD) | 0.01% |
| Wireless Connectivity | |
| Wi-Fi | |
| Wireless Security | |
| Bluetooth | 2.1 |
| Bluetooth Profiles | |
| Supported Audio Codecs | |
| Bluetooth Range | 30' / 9.1 m |
| Wireless Audio Protocols | |
| DLNA Support | |
| External Control Support | |
| Virtual Assistant Support | |
| Tuner Section | |
| Tuner Type | FM |
| Number of Tuner Presets | |
| Radio Frequencies | |
| Sensitivity | |
| Signal to Noise Ratio | |
| Distortion | |
| Power | |
| AC Input Power | 110 to 240 VAC, 50 / 60 Hz |
| Power Consumption | |
| Physical | |
| Dimensions (W x H x D) | 19.0 x 2.2 x 9.8" / 48.3 x 5.6 x 24.9 cm (Antenna Removed) |
| Weight | |
| Warranty Length | Limited 1-Year Warranty |