United States
R-N303 Stereo Network Receiver Product Image

R-N303 Stereo Network Receiver


Product Description

Enjoy music from a variety of sources with the Yamaha R-N303 Stereo Network Receiver. This 2-channel receiver produces up to 100W of RMS power per channel at 8 Ohms and is equipped with A and B speaker terminals. Built-in AirPlay and Bluetooth allow you to wirelessly stream music from compatible audio sources such as computers, smartphones, and tablets. On-board Wi-Fi and Ethernet connectivity gives you the ability to stream music from Internet radio sources and use DLNA technology to share content with compatible networked devices. Furthermore, the free MusicCast app allows you to control the receiver from your favorite smart device.

In addition to the receiver's aforementioned wireless connectivity, the R-N303 has a coaxial, optical, three stereo RCA, and a phono input for connecting different types of audio sources. Its 1/4" headphone output enables private listening when connecting headphones. This receiver's integrated AM and FM tuners allow you to enjoy free over-the-air content.
Amplifier
Channels 2.0
Amplifier Class
Power Output per Channel 100 W at 8 Ohms / 40 Hz to 20 kHz / 0.2% THD
140 W at 8 Ohms / 1 kHz / 10% THD
Dynamic Power per Channel 125 W at 8 Ohms
150 W at 6 Ohms
165 W at 4 Ohms
180 W at 2 Ohms
Frequency Response
THD+N
Speaker Impedance
Tone Control
Damping Factor
Audio Processing
Auro 3D Support No
Supported File Formats 5.6 MHz DSD, AAC, AIFF, ALAC, FLAC, MP3, WAV, WMA
DAC
Connectivity
Rear A/V Inputs 1 x Optical TOSLINK
1 x Digital Coaxial
1 x Stereo RCA (Phono) with Ground Screw
3 x Stereo RCA
Rear A/V Outputs 1 x Stereo RCA
Front I/O 1 x 1/4" / 6.35 mm Headphone Output
Other Rear I/O 1 x RJ45 (Ethernet)
1 x Wi-Fi Antenna Terminal Input
1 x FM Antenna Terminal Input
1 x AM Antenna Terminal Input
Speaker Connectors 4 x Binding Post Pairs
HDMI Compression Modes
Media Card Slot
A/B Speaker Selection
Bi-Amp Capability
Input Impedance
Input Sensitivity
Rated Output / Impedance
Dynamic Range
Signal to Noise Ratio
Total Harmonic Distortion (THD)
Wireless Connectivity
Wi-Fi
Wireless Security
Bluetooth 2.1 + EDR
Bluetooth Profiles A2DP, AVRCP
Supported Audio Codecs AAC, SBC
Bluetooth Range
Wireless Audio Protocols AirPlay, Wi-Fi Direct
DLNA Support Yes
External Control Support
Virtual Assistant Support
Tuner Section
Tuner Type AM, FM
Number of Tuner Presets
Radio Frequencies
Sensitivity FM Mono at 50 dB: 3 µV / 20.8 dBf
Signal to Noise Ratio
Distortion
Power
AC Input Power
Power Consumption Standby: 0.1 W
Network Standby: 1.8 W
Physical
Dimensions (W x H x D) 17.1 x 5.5 x 13.4" / 43.5 x 14.0 x 34.0 cm (Antenna Removed)
17.1 x 8.0 x 13.4" / 43.5 x 20.3 x 34.0 cm (Antenna Up)
Weight 15.9 lb / 7.2 kg
Warranty Length Limited 2-Year Warranty
Change Your Country