United States
P1264 720p Network Pinhole Camera Product Image

P1264 720p Network Pinhole Camera


Product Description

Designed for covert surveillance, the P1264 720p Network Pinhole Camera from Axis Communications consists of a P12 Mk II main unit and F1004 pinhole sensor unit. Together, the camera can capture 1280 x 720 resolution video at up to 30 fps. Wide Dynamic Range (WDR) and low light sensitivity allow the camera to produce accurate images in varying lighting conditions. The pinhole design lets you install the lens component flush on a flat surface when used with the included F8206 mounting bracket. The included 26' cable allows you to mount the main unit separately, where needed.
Camera
Image Sensor 1/4" progressive scan RGB CMOS sensor
Lens 3.7mm, f/2.5
Field of View Horizontal: 57°
Vertical: 31°
Minimum Illumination 0.5 lux
Shutter Speed 1/24,500 to 1/6 sec
Video
Compression H.264 (MPEG-4 Part 10/AVC) baseline, main, and high profiles, MJPEG
Resolution 1280 x 720 at 25/30 fps (50/60 Hz)
Streaming Multiple, individually configurable streams in H.264 (main, baseline and high profiles) and MJPEG, controllable frame rate and bandwidth, VBR/MBR H.264, Axis' Zipstream technology in H.264
Image Settings Compression, color, brightness, sharpness, contrast, white balance, exposure value, exposure control, exposure zones, local contrast, rotation, corridor format, WDR, text and image overlay, privacy mask, mirroring of images
Network
Security Password protection, IP address filtering, HTTPS encryption, IEEE 802.1X network access control, digest authentication, user access log, centralized certificate management
Supported Protocols IPv4/v6, HTTP, HTTPS, SSL/TLS, QoS Layer 3 DiffServ, FTP, CIFS/SMB, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, SFTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS, SSH
System Integration
Application Programming Interface Open API for software integration, including VAPIX and Axis Camera Application Platform (ACAP), Axis Video Hosting System (AVHS) with One-Click Connection, ONVIF Profile S
Analytics Axis Video Motion Detection 3, Active tampering alarm, support for Axis Camera Application Platform enabling installation of Axis Cross Line Detection and third-party applications
Event Trigger Analytics, edge storage events
Event Action File Upload: Email, FTP, HTTP, HTTPS, network share
Notification: Email, HTTP, HTTPS and TCP
Pre- and post-alarm video buffering
Send SNMP trap, WDR mode
Built-In Installation Aids Pixel counter
Data Streaming Event data
General
Casing P12 Mk II Main Unit: Steel and plastic
F1004 Pinhole Sensor Unit: Metal casing (aluminum)
Memory 512 MB RAM, 256 MB flash
Power Power over Ethernet IEEE 802.3af/802.3at Type 1 Class 2: Maximum 4 W, Typical: 2.5 W
Connectors Female RJ45 for 10Base-T/100Base-TX PoE
RJ12 for sensor unit
Storage Support for microSD/microSDHC/microSDXC card up to 64 GB (available separately) and recording to dedicated network-attached storage (NAS) (available separately)
Operating Temperature -4 to 122°F (-20 to 50°C)
Operating Humidity 10 to 85%, non-condensing
Storage Temperature -40 to 149°F (-40 to 65°C)
Approvals EMC: EN 55022 Class B, FCC Part 15 Subpart B Class B, ICES-003 Class B, VCCI Class B, RCM AS/NZS CISPR 22 Class B
Safety: IEC/EN/UL 60950-1
Environment: IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-6, IEC 60068-2-14, IEC 60068-2-27
Video Management Software Axis Companion, Camera Station, and video management software from Axis' application development partners
Dimensions P12 Mk II Main Unit: 0.65 x 1.8 x 4.3" (16.5 x 46 x 109 mm)
F1004 Pinhole Sensor Unit: 1.06 x 0.8 x 0.7" (27 x 20 x 18 mm)
Sensor Unit Cable: 26' (8 m)
Weight P12 Mk II Main Unit: 2.5 oz (72 g)
F1004 Sensor Unit: 0.5 oz (14 g)
Cable: 4.5 oz (128 g)
Change Your Country