R-S202 Stereo Receiver with Bluetooth (Black)
Product Description
Optimized for stereo sound with simple connectivity, the black Yamaha R-S202 Stereo Receiver features four stereo RCA inputs, one stereo RCA output for recording to an external device like a CD recorder, and a 1/4" headphone output. Its only other wired connections are the speaker outputs, which will allow you to set up two pairs of speakers in an A/B configuration. This will enable you to have either pair active, or both pairs active at the same time. It has Bluetooth built in for wireless streaming from smartphones, tablets, and more. The receiver outputs up to 100W per channel at 8 Ohms and includes an IR remote control
Amplifier | |
Channels | 2.0 |
Amplifier Class | |
Power Output per Channel | 100 W at 8 Ohms / 40 Hz to 20 kHz / 0.2% THD 115 W at 4 Ohms / 1 kHz / 0.7% THD 140 W at 8 Ohms / 1 kHz / 10% THD |
Dynamic Power per Channel | 125 W at 8 Ohms 150 W at 6 Ohms 165 W at 4 Ohms 180 W at 2 Ohms |
Frequency Response | 20 Hz to 20 kHz �0.5 dB |
THD+N | |
Speaker Impedance | 8 Ohms |
Tone Control | |
Damping Factor | |
Audio Processing | |
Auro 3D Support | No |
Supported File Formats | |
DAC | |
Connectivity | |
Rear A/V Inputs | 4 x Stereo RCA |
Rear A/V Outputs | 1 x Stereo RCA |
Front I/O | 1 x 1/4" / 6.35 mm Headphone Output |
Other Rear I/O | 1 x AM Antenna Terminal 1 x FM Antenna Terminal |
Speaker Connectors | 4 x Spring Clip Pairs |
HDMI Compression Modes | |
Media Card Slot | |
A/B Speaker Selection | Yes |
Bi-Amp Capability | |
Input Impedance | |
Input Sensitivity | |
Rated Output / Impedance | |
Dynamic Range | |
Signal to Noise Ratio | |
Total Harmonic Distortion (THD) | |
Wireless Connectivity | |
Wi-Fi | |
Wireless Security | |
Bluetooth | 4.1 |
Bluetooth Profiles | A2DP, AVRCP |
Supported Audio Codecs | AAC, SBC |
Bluetooth Range | |
Wireless Audio Protocols | |
DLNA Support | |
External Control Support | |
Virtual Assistant Support | |
Tuner Section | |
Tuner Type | |
Number of Tuner Presets | 40 Stations |
Radio Frequencies | |
Sensitivity | FM Mono at 50 dB: 3 µV / 20.8 dBf |
Signal to Noise Ratio | |
Distortion | |
Power | |
AC Input Power | |
Power Consumption | Standby: 0.5 W |
Physical | |
Dimensions (W x H x D) | 17.1 x 5.0 x 12.3" / 43.4 x 12.7 x 31.2 cm |
Weight | 14.8 lb / 6.7 kg |
Warranty Length | Limited 2-Year Warranty |