Audix D2 Dynamic Instrument Microphone Trio (3-Pac
Product Description
The Audix D2 Trio (3-Pack) is well suited for use in stage - studio - and broadcast applications - and features the frequency and sensitivity response required for accurately reproducing signals from drums and percussion instruments This package comes with everything you need for miking your toms The mic has a dynamic element capable of reproducing signals with high transient peaks - while maintaining a clear - punchy - and warm sound The D2 offers a frequency response of 68 Hz to 18 kHz which features a slight bump in the mid-bass frequencies The contoured mid-bass response accentuates the tonal frequencies associated with instruments that have a percussive nature - such as rack toms - congas - floor toms - saxophone - brass - horns - as well as guitar and bass cabinets The hypercardioid polar pattern provides a tight pickup area at the front of the capsule for isolation and feedback control - and it is equipped with a VLM (Very Low Mass) diaphragm for natural - accurate sound reproduction Ambiance and noise at the off-axis sections of the microphone are greatly reduced - resulting in high signal-to-noise ratio
Features: Ideal for Stage, Studio & Broadcast, For Saxophone & Brass, For Guitar & Bass Cabinets, Hypercardioid Condenser, Enhanced Mid-Bass Frequencies, Dynamic Element, 68 Hz to 18 kHz Frequency Range, For Drums & Percussion, >144 dB Maximum SPL Rating, 3x D-Vice Rim-Mount Clamps
Microphone Type: Large Diaphragm
Polar Pattern: Hypercardioid
Element Type: Dynamic
Orientation: End Address
Controls: No
Pad: No
Circuitry: Solid-State
Included Tone/Pattern Caps: No
Frequency Response: 68 Hz to 18 kHz
Maximum SPL: 144 dB
Sensitivity: 1.2 mV/Pa (at 1 kHz)
Analog Output Connector: 1x XLR 3-Pin
USB/Digital Output: No
Power Sources: No Power Required
Included Mounting & Placement Accessories: Instrument Clamp
Dimensions: L: 3.9-inch / L: 100 mm
Dimensions: L: 3.9-inch / L: 100 mm
Weight: 4.5 oz / 128 g
Weight: 4.5 oz / 128 g
