5MP Cube Camera
Product Description
The 5MP Cube Camera from ACTi utilizes a 2.8mm fixed lens for a 92.6° horizontal field of view, providing a wide coverage area. With a 1/3.2" progressive-scan CMOS sensor, the camera features a maximum resolution of 2592 x 1944 at 15 fps. Wide dynamic range, white balance, auto gain control, and digital noise reduction features enable you to capture clear images in ambient lighting. The camera uses both H.264 and MJPEG formatting for maximizing your storage and bandwidth, and a microSD slot allows for on-site recording with edge storage. Additionally, a built-in microphone and a 3.5mm jack output offer 2-way audio capability.
You can program the camera to trigger an alarm when motion is detected in up to three programmable zones within your field of view. Once an alarm is triggered, the camera will send you an email with a snapshot of the situation or save a video of the incident to your local storage. Furthermore, there are four configurable privacy zones, allowing you to customize your field of view. The RJ45 Ethernet connection uses PoE technology for a simple installation, and the camera can be wall or ceiling mounted for multiple setup options. ONVIF compliance enables compatibility with a wide range of surveillance devices, allowing you to connect the camera to an NVR for additional storage and management features.
You can program the camera to trigger an alarm when motion is detected in up to three programmable zones within your field of view. Once an alarm is triggered, the camera will send you an email with a snapshot of the situation or save a video of the incident to your local storage. Furthermore, there are four configurable privacy zones, allowing you to customize your field of view. The RJ45 Ethernet connection uses PoE technology for a simple installation, and the camera can be wall or ceiling mounted for multiple setup options. ONVIF compliance enables compatibility with a wide range of surveillance devices, allowing you to connect the camera to an NVR for additional storage and management features.
Camera | |
Image Sensor | 1/3.2" progressive-scan CMOS |
Minimum Illumination | Color: 0.1 lux at f/2.0 (30 IRE, 2400 K) |
Shutter Speed | Manual Mode: 1/5 to 1/2,000 seconds Auto Mode: 1/5 to 1/10,000 seconds |
Horizontal Resolution | 1350 TVL |
S/N Ratio | 52 dB |
Lens | |
Lens | 2.8mm fixed |
Aperture | f/2.0 |
Iris | Fixed |
Focus | Manual |
Lens Mount | CS Mount (interchangeable lens) |
Horizontal Viewing Angle | 92.6° |
Video | |
Compression | H.264 HP, MJPEG |
Maximum Frame Rate | 2592 x 1944 at 15 fps 2048 x 1536 at 15 fps 1920 x 1080 at 30 fps 1280 x 720 at 30 fps 800 x 600 at 30 fps 640 x 480 at 30 fps 320 x 240 at 15 fps |
Multi-Streaming | Simultaneous dual streams based on two configurations |
Bit Rate | 28 Kbps to 6 Mbps (per steam) |
Bit Rate Mode | Constant, variable |
Image Enhancement | Basic WDR (74 dB) White Balance: Automatic, hold, and manual Brightness, Contrast, Sharpness (auto) Automatic gain control 2D + 3D Digital noise reduction Flickerless |
Privacy Masking | 4 configurable regions |
Text Overlay | User defined text on video |
Image Orientation | Image flip and mirror |
Audio | |
Compression | 8 kHz, mono, PCM, 16 bit encoding, G.711 |
Input | Built-in microphone |
Output | 3.5mm phone jack |
Network | |
Protocol | TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTSP, IPv4, IPv6, DNS, DDNS, NTP, ICMP, ARP, IGMP, SMTP, FTP, UPnP, SNMP, Bonjour |
Network Connectors | 1 x Ethernet (10/100 Base-T), RJ45 connector |
Security | IP address filtering, HTTPS encryption, password protected user levels, anonymous login, IEEE 802.1X network access control |
Alarm | |
Alarm Trigger | Video motion detection (3 regions), Sound detection |
Alarm Response | Notify control center, change camera settings, command other devices, email notification with snapshot, save video or snapshot to local storage, upload video or snapshot to FTP |
Interface | |
Local Storage | microSDHC/SDXC memory card slot |
Integration | |
Unified Solution | Fully compatible with ACTi software |
ISV Integration | Software Development Kit (SDK) available ONVIF-compliant |
GPS | Positioning: Manual setting |
Firmware Access Browser | Microsoft Internet Explorer 8.0 or newer (full functionality) Safari with QuickTime installed, and other browsers with VLC installed (partial functionality) |
General | |
Power Source | PoE Class 2 (IEEE 802.3af) |
Power Consumption | 3.552 W |
Mount Type | Wall, Ceiling |
Starting Temperature | 14 to 122°F / -10 to 50°C |
Operating Temperature | 14 to 122°F / -10 to 50°C |
Operating Humidity | 10 to 85% RH |
Approvals | CE (EN 55022 Class B, EN 55024), FCC (Part15 Subpart B Class B), UL (for optional PoE injector) |
Dimensions | 3.8 x 3.8 x 1.8" / 9.7 x 9.7 x 4.6 cm |
Weight | 8.5 oz / 241.0 g |