USA 
5MP Outdoor Bullet Camera
Product Description
The 5MP Outdoor Bullet Camera from ACTi utilizes a 1/3.2" progressive-scan CMOS sensor to capture video in 2592 x 1944 resolution at 15 fps, and it features a 4.2mm lens for a 62.7° horizontal field of view. Twenty integrated IR LEDs enable the camera to capture video at a distance of up to 98.4', even in complete darkness. Additionally, WDR, white balance, automatic gain control, and digital noise reduction enable the camera to capture clear images in ambient lighting. H.264 and MJPEG formatting maximizes your storage and bandwidth usage, and a microSD slot supports microSD cards for on-site recording and edge storage. Additionally, PoE technology enables you to setup the camera using just one RJ45 cable, simplifying your installation process.
The camera can be programmed to set off an alarm when motion is detected in any of three configurable zones. Once an alarm is triggered, the camera will send you an email with a snapshot of the situation or save a video of the incident to your FTP server. There are four configurable privacy regions for customizing your field of view, and brightness, contrast, and sharpness settings allow you to configure your camera based on various environments. The camera is ONVIF compliant, enabling compatibility with a variety of other surveillance devices, and its IP68-rated weatherproof and IK10-rated vandal-proof metal enclosure enables the camera to be installed outdoors and in high-risk areas.
The camera can be programmed to set off an alarm when motion is detected in any of three configurable zones. Once an alarm is triggered, the camera will send you an email with a snapshot of the situation or save a video of the incident to your FTP server. There are four configurable privacy regions for customizing your field of view, and brightness, contrast, and sharpness settings allow you to configure your camera based on various environments. The camera is ONVIF compliant, enabling compatibility with a variety of other surveillance devices, and its IP68-rated weatherproof and IK10-rated vandal-proof metal enclosure enables the camera to be installed outdoors and in high-risk areas.
| Image Sensor | 1/3.2" progressive-scan CMOS |
| Effective Pixels | 5.04 MP: 2592 (H) x 1944 (V) |
| Horizontal Resolution | 1350 TVL |
| Day/Night | Yes |
| Low Light Sensitivity | Standard |
| Minimum Illumination | Color: 0.1 lux at f/1.8 (30 IRE, 2400 K) B/W: 0 lux (IR LED on) |
| Color to B/W switch | Configurable ISP-based switch |
| Mechanical IR Cut Filter | Yes |
| IR Sensitivity Range | 700 to 1100 nm |
| IR LED | Adaptive IR LED x 20 (850 nm) |
| IR Working Distance | 98.4' / 30.0 m (0 lux, 30 IRE, Gain 255, Auto shutter mode) |
| Electronic Shutter | Manual Mode: 1/5 to 1/2,000 seconds Auto Mode: 1/5 to 1/10,000 seconds |
| Signal to Noise Ratio | 52 dB |
| Lens | |
| Focal Length | 4.2mm fixed |
| Aperture | f/1.8 |
| Iris | Fixed |
| Focus | Fixed |
| Lens Mount | Board |
| Horizontal Viewing Angle | 62.7° |
| Video | |
| Compression | H.264 (Baseline / Main / High Profile), MJPEG |
| Maximum Frame Rate vs. Resolution | 2592 x 1944 at 15 fps 2048 x 1546 at 15 fps 1920 x 1080 at 30 fps 1280 x 720 at 30 fps 800 x 600 at 30 fps 640 x 480 at 30 fps 320 x 240 at 15 fps |
| Multi-Streaming | Simultaneous dual steams based on 2 configurations |
| Bit Rate | 28 kb/s to 6 Mb/s (per stream) |
| Bit Rate Mode | Constant, variable |
| Image Enhancement | Basic WDR (74 dB) White balance (automatic, hold, manual) Brightness, Contrast, Sharpness (auto) Automatic gain control Digital noise reduction Flickerless |
| Privacy Mask Type | 4 configurable regions |
| Text Overlay | User-defined text on video |
| Image Orientation | Image flip and mirror |
| Network | |
| Protocol | TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTSP, IPv4, IPv6, DNS, DDNS, NTP, ICMP, ARP, IGMP, SMTP, FTP, UPnP, SNMP, Bonjour |
| Ethernet Port | 1 x Ethernet (10/100 Base-T), RJ-45 connector |
| Security | IP address filtering, HTTPS encryption, password-protected user levels, anonymous login, IEEE 802.1X network access control |
| Alarm | |
| Alarm Triggers | Video motion detection (3 regions) |
| Alarm Response | Notify control center, change camera settings, command other devices, email notifications with snapshots, upload video or snapshot to FTP |
| Interface | |
| Local Storage | microSDHC/SDXC memory card slot |
| Integration | |
| Unified Solution | Fully compatible with ACTi software |
| ISV Integration | Software Development Kit (SDK) available ONVIF-compliant |
| GPS | Positioning: manual setting |
| Firmware Access Browser | Microsoft Internet Explorer 8.0 or newer (full functionality) Safari with QuickTime installed and other browsers with VLC installed (partial functionality) |
| General | |
| Power Source | PoE Class 2 (IEEE802.3af) |
| Power Consumption | 4.8 W (IR on) |
| Environmental Casing | Weatherproof (IP68-rated) Vandal proof (IK10-rated) |
| Mount Type | Wall, ceiling, corner, pole |
| Starting Temperature | -4 to 122°F (-20 to 50°C) |
| Operating Temperature | -40 to 122°F (-40 to 50°C) |
| Operating Humidity | 10 to 85% RH |
| Approvals | CE (EN 55022 Class B, EN 55024), FCC (Part15 Subpart B Class B), NEMA 4X, UL (for optional PoE injector and power adapter) |
| Dimensions (Ø x H) | 3.0 x 7.5" (7.7 x 19.0 cm) |
| Weight | 1.3 lb (704 g) |